Determination of Overall Equipment Efectiveness Superflex Machine Using Fuzzy Approach

Sesar Husen Santosa(1*), Suhendi Irawan(2), Ilham Ardani(3),


(1) Institut Pertanian Bogor
(2) Van Hall Larenstein University
(3) Industrial Management Study Progam, Institut Pertanian Bogor
(*) Corresponding Author

Abstract


This study aimed to present a Fuzzy logic approach in determining the value of OEE Superflex machine for producing nuggets. The effectiveness value of Superflex machine in producing nugget raw materials was determined by calculating the Availability, Performance and Quality Yield values. Fuzzy approach in determining the value of OEE can be used because this approach is able to describe the value of the effectiveness of thr machines based on the condition of the company's actual capacities. The Fuzzy OEE approach uses the Trapezoidal Membership Association because the maximum value of the membership degree has more than one value in each parameter. The Fuzzy OEE value shows that Superflex machine had an OEE value with bad parameters so that the company has to improve its machine performance

Keywords


Business Intelligence

Full Text:

PDF

Article Metrics

Abstract view : 140 times
PDF - 34 times

References


S. E. G. Da Costa and E. P. De Lima, “Uses and misuses of the ‘overall equipment effectiveness’ for production management,” IEEE Int. Eng. Manag. Conf., vol. 2, pp. 816–820, 2002.

F. Zammori, “Fuzzy Overall Equipment Effectiveness (FOEE): Capturing performance fluctuations through LR Fuzzy numbers,” Prod. Plan. Control, vol. 26, no. 6, pp. 451–466, 2015.

R. Oechsner, M. Pfeffer, L. Pfitzner, H. Binder, E. Müller, and T. Vonderstrass, “From overall equipment efficiency (OEE) to overall Fab effectiveness (OFE),” Mater. Sci. Semicond. Process., vol. 5, no. 4-5 SPEC., pp. 333–339, 2002.

R. Singh, D. B. Shah, A. M. Gohil, and M. H. Shah, “Overall equipment effectiveness (OEE) calculation - Automation through hardware & software development,” Procedia Eng., vol. 51, pp. 579–584, 2013.

R. Wudhikarn, “Improving overall equipment cost loss adding cost of quality,” Int. J. Prod. Res., vol. 50, no. 12, pp. 3434–3449, 2012.

I. Zennaro, D. Battini, F. Sgarbossa, A. Persona, and R. De Marchi, “Micro downtime: Data collection, analysis and impact on OEE in bottling lines the San Benedetto case study,” Int. J. Qual. Reliab. Manag., vol. 35, no. 4, pp. 965–995, 2018.

F. Anvari, R. Edwards, and A. Starr, “Methodology and theory evaluation of overall equipment effectiveness based on market,” J. Qual. Maint. Eng., vol. 16, no. 3, pp. 256–270, 2010.

P. H. Tsarouhas, “Evaluation of overall equipment effectiveness in the beverage industry: A case study,” Int. J. Prod. Res., vol. 51, no. 2, pp. 515–523, 2013.

P. Muchiri and L. Pintelon, “Performance measurement using overall equipment effectiveness (OEE): Literature review and practical application discussion,” Int. J. Prod. Res., vol. 46, no. 13, pp. 3517–3535, 2008.

K. Govindan, A. Diabat, and K. Madan Shankar, “Analyzing the drivers of green manufacturing with fuzzy approach,” J. Clean. Prod., vol. 96, pp. 182–193, 2015.

A. Baykasoglu and T. Gocken, “Multi-objective aggregate production planning with fuzzy parameters,” Adv. Eng. Softw., vol. 41, no. 9, pp. 1124–1131, 2010.

J. C. Figueroa-García, D. Kalenatic, and C. A. Lopez-Bello, “Multi-period Mixed Production Planning with uncertain demands: Fuzzy and interval fuzzy sets approach,” Fuzzy Sets Syst., vol. 206, pp. 21–38, 2012.

C. Andersson and M. Bellgran, “On the complexity of using performance measures: Enhancing sustained production improvement capability by combining OEE and productivity,” J. Manuf. Syst., vol. 35, pp. 144–154, 2015.

T. Ylipää, A. Skoogh, J. Bokrantz, and M. Gopalakrishnan, “Identification of maintenance improvement potential using OEE assessment,” Int. J. Product. Perform. Manag., vol. 66, no. 1, pp. 126–143, 2017.

J. A. Garza-Reyes, S. Eldridge, K. D. Barber, and H. Soriano-Meier, “Overall equipment effectiveness (OEE) and process capability (PC) measures: A relationship analysis,” Int. J. Qual. Reliab. Manag., vol. 27, no. 1, pp. 48–62, 2010.

M. baghbani, S. Iranzadeh, and M. Bagherzadeh khajeh, “Investigating the relationship between RPN parameters in fuzzy PFMEA and OEE in a sugar factory,” J. Loss Prev. Process Ind., vol. 60, no. May, pp. 221–232, 2019.

J. Rezaei and R. Ortt, “Supplier segmentation using fuzzy logic,” Ind. Mark. Manag., vol. 42, no. 4, pp. 507–517, 2013.

Y. A. Phillis and L. A. Andriantiatsaholiniaina, “Sustainability: An ill-defined concept and its assessment using fuzzy logic,” Ecol. Econ., vol. 37, no. 3, pp. 435–456, 2001.

J. S. R. Jang, “ANFIS: Adaptive-Network-Based Fuzzy Inference System,” IEEE Trans. Syst. Man Cybern., 1993.

E. H. Mamdani, “Advances in the linguistic synthesis of fuzzy controllers,” Int. J. Man. Mach. Stud., vol. 8, no. 6, pp. 669–678, 1976.

A. Amindoust, S. Ahmed, A. Saghafinia, and A. Bahreininejad, “Sustainable supplier selection: A ranking model based on fuzzy inference system,” Appl. Soft Comput. J., vol. 12, no. 6, pp. 1668–1677, 2012.




DOI: https://doi.org/10.29099/ijair.v4i2.142

________________________________________________________

International Journal Of Artificial Intelligence Research

Organized by: Departemen Teknik Informatika STMIK Dharma Wacana
Published by: STMIK Dharma Wacana
Jl. Kenanga No.03 Mulyojati 16C Metro Barat Kota Metro Lampung
phone. +62725-7850671
Fax. +62725-7850671
Email: info@ijair.id | internationaljournalair@gmail.com | herinurdiyanto@ieee.org 

View IJAIR Statcounter

Creative Commons License
IJAIR is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.